- - - - - -

"FAT" Dual Control
Kit Contents

Brake with accelerator kits ( Item #: FAT2 ) will come with all the items shown in the following picture.

Brake only kits ( Item #: FAT1 ) will come with the just the green lettered items.

FAT1 and FAT2 Kit Contents
Items included in FAT2 only.
  1. Accelerator Pedal: with rubber.
  2. Accelerator Passenger Side Pulley: with block.
  3. Accelerator Cable (item# fca78)
  4. Accelerator Cable Clip (New style made of aluminum) (item# faclm)
  5. Accelerator Cable Housing (item# fh-48)
  6. Accelerator Driver Side Pulley: with block. (item# fafas)
Items included in: FAT1 and FAT2
  1. Main Unit: With pivot arm and two pulleys
  2. Brake Pedal
  3. Cable To Pedal Clamp Assembly (item# f-clm)
  4. Driver's Side Floor Assembly (item# f-fas)
  5. Brake Cable (item# fc-67)
  6. Cable Housing: Also referred to as Outer Cable (item# fh-48)
  7. Installation Instructions
Please Note: Installation hardware is no longer included with the FAT kits: We have found that installers have preferred to use their own hardware based on their preference and what is more useful for the particular application. The installer’s desired nuts, bolts and screws can be easily obtained at the local hardware store.

Manual transmission kits ( Item #: FAT3 ) will come with all the items shown in the following picture.

FAT3 Kit Contents
  1. Main Unit: With pivot arms and pulleys
  2. Clutch and Brake Pedals
  3. Accelerator Pedal
  4. Three Cable Housings: Also referred to as Outer Cables (item# fh-48)
  5. Clutch and Brake Cables (item# fc-67)
  6. Accelerator Cable (item# fca78)
  7. Accelerator Passenger Side Pulley: with block.
  8. Accelerator Driver Side Pulley: with block. (item# fafas)
  9. Two Driver's Side Floor Assemblies (item# f-fas)
  10. Two Cable To Pedal Clamp Assemblies (item# f-clm)
  11. Accelerator Cable Clip (New style made of aluminum, item# faclm)
  12. Installation Instructions
Valid XHTML 1.0 Transitional