FAT1, Main Unit

FAT Driving Instructor’s Brake Kit, item# FAT1

To help you determine how this dual control kit will fit into your driving school vehicle, we provide the following dimension information.

Make note that an important consideration when installing the dual brake is how the cable housing will be routed to the driver’s side. This path will need to be “reasonably” straight.

For your convenience, the figures on this page are given in inches. Please note, however, that the product has been designed and manufactured in metric.

FAT2, Main Unit

Brake and Accelerator Kit, Model A, item# FAT2

To help you determine how this dual control kit will fit into your driving school vehicle, we provide the following dimension information.

Make note that an important consideration when installing the dual brake is how the cable housing will be routed to the driver’s side. This path will need to be “reasonably” straight.

For your convenience, the figures on this page are given in inches. Please note, however, that the product has been designed and manufactured in metric.

FAT 7B, Main Unit

(Please Note, March 2023, The picture shown is out dated.  The torsion springs are no longer a part of the unit.)

FAT Brake and Accelerator Kit, Model B, item# FAT7B

To help you determine how this dual control kit will fit into your driving school vehicle, we provide the following dimension information.

Make note that an important consideration when installing the dual brake is how the cable housing will be routed to the driver’s side. This path will need to be “reasonably” straight.

For your convenience, the figures on this page are given in inches. Please note, however, that the product has been designed and manufactured in metric.

FAT3 Kit, Main Unit

FAT Manual Transmission Kit, Clutch, Brake and Accelerator, item# FAT3

To help you determine how this dual control kit will fit into your driving school vehicle, we provide the following dimension information.

Make note that an important consideration when installing the dual brake is how the cable housing will be routed to the driver’s side. This path will need to be “reasonably” straight.

For your convenience, the figures on this page are given in inches. Please note, however, that the product has been designed and manufactured in metric.

Driver's Side, Item: fxfas and fxclm

To help you determine how this dual control kit will fit into your driving school vehicle, we provide the following dimension information.

For your convenience, the figures on this page are given in inches. Please note, however, that the product has been designed and manufactured in metric.

Cable To Brake Pedal Clamp Assembly, item# fxclm

Driver’s Side Floor Assembly, item# fxfas

Driver's Side, Item: fxfaa

Driver Side Accelerator Floor Assembly, item# fxfaa

To help you determine how this dual control kit will fit into your driving school vehicle, we provide the following dimension information.

For your convenience, the figures on this page are given in inches. Please note, however, that the product has been designed and manufactured in metric.

Cable and Housing Dimensions

Cable and Housing Dimensions and Information

  • Cable housing are sometimes referred to as the outer cable.
  • Cable housings need to be trimmed to the length needed for the particular application.
  • Clutch and Brake cable diameter is 1/8 inch: Accelerator cable diameter is 1/16 inch. See Note 1 below.
  • Cable Housing Diameter is 3/8 of an inch: Same diameter and type of housing is used for both the accelerator and brake parts of the kit.
  • Clutch and Brake cable item numbers start with “ fc “, followed by a dash and the length in inches: Accelerator cable item numbers start with ” fca “, followed by the length in inches.
  • Housing item numbers start with “ fh “, followed by a dash and the length in inches.
  • Standard Dual Control Kits come with a brake cable housing overall length of 48 1/2 inches (item# fh-48 ): Inner cable length is 67 1/2 inches (item# fc-67 ).
  • Standard FAT3 Kits come with a clutch cable housing overall length of 48 1/2 inches (item# fh-48 ): Inner cable length is 67 1/2 inches (item# fc-67 ).
  • Standard Dual Control Kits come with an accelerator housing overall length of 48 1/2 inches (item# fh-48 ): Inner cable length is 78 inches (item# fca78 ).
  • Allow for 3/8 of an inch on each side for insertion into each pulley assembly.
  • FAT Dual Control kits with longer cables and housings are available if needed, item #’s faL1, faL2, faL7B and faL3.

Note 1: The above mentioned cables are actually a metric product: 1/8 diameter cables are actually 3mm (.118 inches) , the 1/16 diameter accelerator cables are actually 2mm (.078 inches)